QUICKTRONIC QTI2X35/49/80 DA
Out of stock
SKU
4.0503E+12
€64.32
Quick Overview
Product family benefits
- System+ Guarantee available
- Easy integration in luminaire thanks to same dimensions like DALI GI ECG
- TouchDIM function for easy and inexpensive dimming of several ECGs
- Same luminous flux with direct and alternating current
- Dimming of amalgam lamps without flickering or reduced lifespan
- Automatic restart after lamp replacement
DALI product features
- Control via the DALI interface
- Compliance with the DALI Version-1 and IEC 60929
- Control input protected against overvoltage and polarity reversal (OSRAM ECG)
Touch DIM and Touch DIM Sensor function
- Manual dimming without controller and with standard switches
- Including memory function (double click) and soft start
Some orders might be shipped from different warehouses.
Free Shipping - On Orders Over €150.
TECHNICAL DATA
ELECTRICAL DATA
Input voltage AC | 198…264 V |
Nominal voltage | 220…240 V |
Mains frequency | 50…60 Hz |
Input voltage DC | 154…276 V |
Operating frequency | 44…120 kHz |
Max. ECG no. on circuit breaker 10 A (B) | 5 |
Max. ECG no. on circuit breaker 16 A (B) | 9 |
Power loss in stand-by mode | 0.2 W |
Inrush current | 60 A |
LIGHT TECHNICAL DATA
Starting time | 0.6 s |
DIMENSIONS & WEIGHT
Length | 423.0 mm |
Width | 30.0 mm |
Height | 21.0 mm |
Mounting hole spacing, length | 415.0 mm |
Product weight | 370.00 g |
Wire preparation length, input side | 8.0…9.0 mm |
Wire preparation length, output side | 8.0…9.0 mm |
Cable cross-section, output side | 0.5…1.5 / 0.5…1.0 mm² |
Cable cross-section, input side | 0.5…1.5 / 0.5…1.0 mm² |
TEMPERATURES & OPERATING CONDITIONS
Ambient temperature range | +10…+50 °C |
Permitted rel. humidity during operation | 5…85 % |
LIFESPAN
ECG lifetime | 100000 h |
CAPABILITIES
Dimming interface | DALI / Touch DIM / Touch DIM Sensor |
Dimming range | 1…100 % |
Dimmable | Yes |
Overload protection | Yes |
Overheating protection | Power reduction and switch off at T > 75 °C at the tc point |
Suitable for fixtures with prot. class | I |
End of lamp life safety shutdown | EOL T.2 |
CERTIFICATES & STANDARDS
Approval marks – approval | VDE / VDE-EMC / EL / EAC / RCM / CCC |
Standards | Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to IEC 62386-101:Ed1/Acc. to IEC 62386-102:Ed1 |
EEI – Energy Label | A1 BAT |
Protection class | I |
Type of protection | IP20 |